LaCrosse V6-3.6L VIN 7 (2006)
Fuel Pressure: Testing and Inspection
Fuel Pressure Gage Installation and Removal
FUEL PRESSURE GAGE INSTALLATION AND REMOVAL
INSTALLATION PROCEDURE
1. Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure.
CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
NOTE: Clean all of the following areas before performing any disconnections in order to avoid possible contamination in the system:
-
The fuel pipe connections
-
The hose connections
-
The areas surrounding the connections
2. Remove the fuel pressure test port cap.
3. Install the fuel pressure gage to the fuel pressure test port.
CAUTION: Wrap a shop towel around the fuel pressure connection in order to reduce the risk of fire and personal injury. The towel will
absorb any fuel leakage that occurs during the connection of the fuel pressure gage. Place the towel in an approved container when the
connection of the fuel pressure gage is complete.
4. Place the shop towel in an approved container.
5. Perform any tests and/or diagnostics as needed.
REMOVAL PROCEDURE
1. Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the fuel pressure gage.
CAUTION: Wrap a shop towel around the fuel pressure connection in order to reduce the risk of fire and personal injury. The towel will
absorb any fuel leakage that occurs during the connection of the fuel pressure gage. Place the towel in an approved container when the
connection of the fuel pressure gage is complete.
3. Place the shop towel in an approved container.
4. Install the fuel pressure test port cap.
