LaCrosse V6-3.6L VIN 7 (2006)
Seat Belt Retractor: Service and Repair
Seat Belt Retractor Replacement - Right Front
SEAT BELT RETRACTOR REPLACEMENT - RIGHT FRONT
REMOVAL PROCEDURE
1. Remove the upper center pillar trim.
2. Remove the lower center pillar trim.
3. Remove the guide loop nut.
4. Remove the guide loop from the guide adjuster bracket.
5. Remove the intermediate guide bolt.
6. Remove the seat belt retractor bolt.
7. Remove the seat belt retractor from the T-slot in the lower center pillar.
INSTALLATION PROCEDURE
1. Install the belt retractor into the T-slot in the center pillar.
2. Install the seat belt retractor bolt.
Tighten the seat belt retractor bolt to 68 N.m (50 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the intermediate guide bolts.
Tighten the intermediate guide bolts to 10 N.m (89 lb in).