LaCrosse V6-3.6L VIN 7 (2006)
Seat Belt Retractor: Service and Repair
Seat Belt Retractor Replacement - Rear
SEAT BELT RETRACTOR REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the rear window trim panel, as required.
2. Remove the rear sound barrier, as required.
3. If removing the center retractor, remove the belt bezel from the rear window shelf. Pass the bezel and seat belt through the rear shelf bezel
opening.
4. Remove the rear seat belt retractor bolt.
5. Remove the rear seat belt retractor from the vehicle.
INSTALLATION PROCEDURE
1. Position the rear seat belt retractor in the vehicle.
2. Install the rear seat belt retractor bolt.
Tighten the rear seat belt retractor bolt to 68 N.m (50 lb ft).
