LaCrosse V6-3.6L VIN 7 (2006)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor Replacement - Bank 2 (Left) Exhaust
CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT - BANK 2 (LEFT) EXHAUST
REMOVAL PROCEDURE
1. Turn the ignition OFF.
2. Remove the power steering fluid reservoir bolts and reposition the power steering fluid reservoir in order to provide access.
IMPORTANT: Do not disconnect the power steering fluid lines/hoses from the reservoir.
3. Remove the camshaft position (CMP) sensor electrical connector.
4. Remove the CMP sensor bolt.
5. Remove the CMP sensor.
INSTALLATION PROCEDURE
