LaCrosse V6-3.6L VIN 7 (2006)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION (CKP) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Turn the ignition OFF.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Reposition the wiring harness heat shield to obtain access.
4. Disconnect the crankshaft position (CKP) electrical connector (3).
5. Remove the crankshaft sensor bolt.
6. Remove the crankshaft sensor.
INSTALLATION PROCEDURE
