LaCrosse V6-3.6L VIN 7 (2006)
Tighten the mounting bolt (3).
^
Tighten the mounting bolt (3) to 50 Nm (37 ft. lbs.).
6. Tighten the rear power steering pump mounting bolt (2).
^
Tighten the rear power steering pump mounting bolt (2) to 50 Nm (37 ft. lbs.).
7. Important: Clean the material from the power steering pressure hose and install a new seal.
Connect the power steering pressure hose to the power steering pump.
^
Tighten the hose to 40 Nm (30 ft. lbs.).
8. Connect the power steering reservoir outlet hose to the power steering pump.
9. Install the right front tire and wheel.
10. Lower the vehicle.
11. Install the drive belt.
12. Remove the drain pan from under the vehicle.
13. Bleed the power steering system.
14. Inspect the system for leaks.
