LaCrosse V6-3.6L VIN 7 (2006)
13. Install the steering column tilt head assembly (1) to the steering column jacket assembly (4).
14. Install the 2 pivot pins (3).
15. Stake the pivot pins location (2).
16. Install the following components onto the steering shaft assembly:
1. The adapter and bearing assembly (1)
2. The lower bearing seat (2)
3. The lower bearing spring (3)
4. The lower spring retainer (4)
5. The sensor retainer (5)
6. The steering shaft seal (6)
17. Install the linear shift assembly.
18. Install the 3 flat-head 6-lobed socket tapping screws The linear shift assembly must be out of the PARK position to install the lower socket tapping
screw.
^
Tighten the 3 flat-head 6-lobed lobed socket tapping screws to 10 Nm (89 inch lbs.).