LaCrosse V6-3.6L VIN 7 (2006)
1. Install the backing plate (2) and the wheel bearing hub (3).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the wheel bearing/hub-to-knuckle bolts.
Tighten the bolts to 75 Nm (55 ft. lbs.).
Rear Wheel Speed Sensors
3. Install the ABS electrical connector to the wheel speed sensor (1), if equipped.
4. Install the brake rotor and caliper.
5. Install the tires and wheels.
6. Lower the vehicle.
