LaCrosse V6-3.6L VIN 7 (2006)
If the driver side hose is pinched, remove the washer hose from the washer line at the air inlet grille panel and cut 10 mm (3/8 in) from the driver side
washer hose. Pull on the existing washer hose and reroute the washer hose upward in a loop as shown in the graphic above. Then attach the washer hose
to the washer line at the air inlet grille panel.
Verify that the condition has been corrected.
Parts Information
Warranty Information
For vehicle repaired under warranty, use the table.
Disclaimer