LaCrosse V6-3.8L (2009)
6. Install the seat pad and trim cover together.
7. Install the seat cushion J-hooks and the hook and loop retainers to secure the trim to the seat pan.
8. Press down on the cushion trim pad to secure the hook and loop retainers to the seat pad.
9. Install the electrical harness clip and the retainer on the adjuster bracket.
10. Connect the electrical harness to the seat motor harness.
11. Install the seat belt pretensioner. Refer to Seat Belt Buckle Pretensioner Replacement (See: Restraint Systems/Seat Belt Systems/Seat Belt
Tensioner/Service and Repair/Removal and Replacement).
12. Install the seat belt bracket.
13. Install the seat trim panel. Refer to Front Seat Adjuster Track Finish Cover Replacement (See: Service and Repair/Front Seat Adjuster Track
Finish Cover Replacement).
Note: Inspect the drive cables. Verify that the cables are straight between the motors and the drive screws.
14. Install the front seat. Refer to Front Seat Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket).
