LaCrosse V6-3.8L (2009)
Installation Procedure
1. Install the yaw rate sensor/lateral accelerometer (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the 2 yaw rate sensor/lateral accelerometer nuts (2).
Tighten the nuts to 25 Nm (18 lb ft).
3. Connect the yaw rate sensor/lateral accelerometer electrical connector (2) to the yaw rate sensor/lateral accelerometer (1).
4. Install a scan tool.
5. Install the front center seat, if removed. Refer to Front Center Seat Replacement (See: Body and Frame/Seats/Service and Repair/Front Center
Seat Replacement).
6. Install the front floor center console, if removed. Refer to Front Floor Console Replacement (See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair).