LaCrosse V6-3.8L (2009)
15. Install the brake pedal pushrod bushing (1).
16. Install the vacuum power brake booster pushrod nut (1) and tighten to 13 Nm (115 lb in).
17. Install the brake pedal position sensor. Refer to Brake Pedal Position Sensor Replacement (See: Lighting and Horns/Brake Light Switch/Service
and Repair/Brake Pedal Position Sensor Replacement).
18. Install the left I/P insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
19. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (LS4) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
