LaCrosse V6-3.8L (2009)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement - Upper
Drive Belt Idler Pulley Replacement - Upper
Removal Procedure
1. Remove the supercharger drive belt. Refer to Drive Belt Replacement (L26) (See: Drive Belt/Service and Repair).
2. Remove the idler pulley bolt.
3. Remove the drive belt idler pulley.
Installation Procedure
1. Install the drive belt idler pulley.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the idler pulley bolt.
Tighten the bolt to 50 Nm (37 lb ft).
