LaCrosse V6-3.8L (2009)
9. Remove the exhaust gas recirculation (EGR) valve wiring harness heat shield nut (1), bolt (2) and the EGR heat shield (3).
10. Disconnect the EVAP purge solenoid pipe quick connect fitting. Refer to Evaporative Emission Canister Purge Solenoid Valve Replacement (
See: Powertrain Management/Emission Control Systems/Evaporative Emissions System/Canister Purge Solenoid/Service and Repair).
11. Remove the fuel rail assembly nuts (2).
12. Remove the fuel rail assembly (1) with the fuel injectors (3).
