LaCrosse V6-3.8L (2009)
2. Install the right exhaust manifold gasket (1).
3. Install the right exhaust manifold (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the right exhaust manifold studs (4) and the nuts (3).
Tighten the studs and the nuts to 30 Nm (22 lb ft).
5. Raise the vehicle.
6. Install the exhaust gas recirculation (EGR) valve inlet adapter pipe bolt (1) to the right exhaust manifold.
Tighten the bolt to 29 Nm (21 lb ft).
7. Lower the vehicle.
