LaCrosse V6-3.8L (2009)
24. Install the exhaust crossover heat shield (2).
25. Install the exhaust crossover heat shield nuts (1).
Tighten the nuts to 20 Nm (15 lb ft).
26. Install the engine mount struts. Refer to Engine Mount Strut Replacement - Right Side (See: Engine/Drive Belts, Mounts, Brackets and
Accessories/Engine Mount/Service and Repair) and Engine Mount Strut Replacement - Left Side (See: Engine/Drive Belts, Mounts, Brackets and
Accessories/Engine Mount/Service and Repair).
27. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Removal and Replacement/Fuel Injector Sight Shield Replacement).
