LaCrosse V6-3.8L (2009)
1. Connect the heater inlet hose to the heater core.
2. Use J 38185 in order to secure the heater core hose inlet clamp.
3. Install the heater hose to the support bracket.
4. Connect the heater inlet hose to the pipe adapter.
5. Use J 38185 in order to secure the heater hose inlet clamp.
6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Removal and Replacement/Fuel Injector Sight Shield Replacement).
7. Fill the cooling system. Refer to Cooling System Draining and Filling (L26 Static Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair)Cooling System Draining and Filling (LS4 Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair)Cooling System Draining and Filling (L26 GE 47716 Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair
)Cooling System Draining and Filling (LS4 GE 47716 Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).
