LaCrosse V6-3.8L (2009)
2. Install the heater outlet adapter pipe.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the heater outlet adapter pipe mounting bolt.
Tighten the bolt to 6 Nm (53 lb in).
4. Install the heater outlet hose to the pipe adapter.
5. Use J 38185 in order to secure the heater core hose clamp.
6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Removal and Replacement/Fuel Injector Sight Shield Replacement).
7. Fill the cooling system. Refer to Cooling System Draining and Filling (L26 Static Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair)Cooling System Draining and Filling (LS4 Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair)Cooling System Draining and Filling (L26 GE 47716 Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair
)Cooling System Draining and Filling (LS4 GE 47716 Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).
