buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Intake Air Temperature Sensor > < Fuel Tank Pressure Sensor Replacement (NT7)|Page 2821
Page 1
background image

Fuel Tank Pressure Sensor: Service and Repair
Fuel Tank Pressure Sensor Replacement (NU6)

Fuel Tank Pressure Sensor Replacement (NU6)

Removal Procedure

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Disconnect the fuel tank wiring harness electrical connector (2) from the fuel tank pressure sensor.
3. Remove the fuel tank pressure sensor (1).

Installation Procedure

1. Install the fuel tank pressure sensor (1).
2. Connect the fuel tank wiring harness electrical connector (2) to the fuel tank pressure sensor.
3. Lower the vehicle.

Intake Air Temperature Sensor > < Fuel Tank Pressure Sensor Replacement (NT7)|Page 2821