LaCrosse V6-3.8L (2009)
4. Ensure that the TPA is in the proper position to remove the terminals.
5. While pushing the terminal forward, insert the J 38125-24 in the release cavity above the terminal you are removing, gently pull the wire out of the
back of the connector. Always remember never use force when pulling a terminal out of a connector. See the release tool cross reference in the
Reference Guide of the J-38125 to ensure that the correct release tool is used.
Terminal Repair Procedure
Use the appropriate terminal and follow the instructions in the J-38125 in order to replace the terminal.
