LaCrosse V6-3.8L (2009)
Child Seat Tether Attachment: Service and Repair
Child Restraint Tether Anchor Replacement
Removal Procedure
1.
Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).
2. Slide the sound barrier out from under the upper quarter panel trim.
3. Pull the sound barrier forward to access the tether bolts.
4. Remove the child seat tether bracket to rear shelf bolts.
5. Remove the child seat tether brackets from the rear shelf.
Installation Procedure
1. Install the child seat tether brackets to the slots in the rear shelf.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the child seat tether bracket to rear shelf bolts.
Tighten the child seat tether bracket to rear shelf bolts to 20 Nm (15 lb ft).
3. Push the sound barrier back into its original position.
4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).