LaCrosse V6-3.8L (2009)
1. Install the belt retractor into the T-slot in the center pillar.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the seat belt retractor bolt.
Tighten the seat belt retractor bolt to 45 Nm (33 lb ft).
3. Install the intermediate guide bolts.
Tighten the intermediate guide bolts to 10 Nm (89 lb in).
4. Position the guide loop to the guide adjuster bracket.
5. Install the guide loop nut.
Tighten the guide loop nut to 42 Nm (31 lb ft).
6. Install the lower center pillar trim. Refer to Center Pillar Lower Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).
7. Install the upper center pillar trim. Refer to Center Pillar Upper Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).
