LaCrosse V6-3.8L (2009)
Battery Current Sensor: Service and Repair
Battery Current Sensor Replacement (L26) (3.8L)
Removal Procedure
1. Disconnect the instrument panel (I/P) harness electrical connector (2) from the battery current sensor (1).
2. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (L26) (See: Battery/Battery Cable/Negative/Service and Repair
).
3. Cut the tie straps and electrical tape (2) attaching the battery current sensor (1) to the battery cable.
4. Squeeze the negative battery cable branches together.
Important: Note the position of the battery current sensor prior to removal.
5. Slide the battery current sensor (1) off of the negative battery cable.