LaCrosse V6-3.8L (2009)
2. Install the through bolts and nuts attaching the strut to the knuckle.
Tighten the through bolts and nuts to 120 Nm (89 lb ft).
3. Connect the outer tie rod to the steering knuckle. Refer to Steering Linkage Outer Tie Rod Replacement (See: Steering/Tie Rod/Service and
Repair/Steering Linkage Outer Tie Rod Replacement).
4. Connect the front lower control arm ball stud to the knuckle. Refer to Lower Control Arm Replacement (See: Control Arm/Service and Repair).
5. Install the front wheel drive shaft bearing. Refer to Front Wheel Bearing and Hub Replacement (See: Wheel Bearing/Service and Repair/Front
Suspension).
6. Lower the vehicle.
7. Inspect the front wheel alignment and adjust if necessary. Refer to Wheel Alignment Measurement (See: Alignment/Service and Repair/Wheel
Alignment Measurement).