LaCrosse V6-3.8L (2009)
13. Install a piece of mechanics wire to the end of the automatic transmission range selector cable.
14. Remove the automatic transmission range selector cable through the hole in the cowl.
Installation Procedure
Warning: Refer to Automatic Transmission Range Selector Cable Warning (See: Service Precautions/Customer Safety Information).
1. Install the automatic transmission range selector cable through the hole in the cowl.
2. Remove the mechanics wire from the end of the automatic transmission range selector cable.
3. If equipped with a steering column shift control, install the automatic transmission range selector cable to the shift control lever.
4. Install the left knee bolster. Refer to Driver Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair).
5. If equipped with a floor console shift control, install the automatic transaxle range selector cable to the console shift control bracket.
6. Install the automatic transaxle range selector cable to the console shift control.
