LaCrosse V6-3.8L VIN 2 (2005)
7. Connect the right roof rail module wiring harness yellow connector (2) to the right roof rail module (3).
8. Install the CPA to the right roof rail module connector (2).
9. Install the right rear panel.
10. Install the SIR Fuse.
11. Close the underhood fuse center cover.
12. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
13. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -
Vehicle in Vehicle DTC Information.
