LaCrosse V6-3.8L VIN 2 (2005)
1. Route the seat belt through the upper center pillar trim panel.
2. Position the upper trim panel to the center pillar.
3. Push firmly on the trim panel in order to seat the retainers.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the fastener to the upper trim panel.
Tighten the nuts to 3 N.m (27 lb in).
5. Install the fastener cover to the upper center pillar trim panel.
6. Install the lower center pillar trim panel.
7. Install the door weatherstrip to the center pillar.
8. Install the seat belt to the seat.