LaCrosse V6-3.8L VIN 2 (2005)
Coolant Reservoir: Service and Repair
Coolant Recovery Reservoir Replacement
Removal Procedure
1. Reposition the coolant reservoir hose clamp (1) aside at the radiator overflow fitting.
2. Remove the coolant reservoir hose from the radiator overflow fitting.
3. Disconnect the coolant reservoir hose support retainer from the electrical harness.
4. Remove the coolant reservoir nuts (2) from the shock tower studs.
5. Remove the coolant recovery reservoir (3) from the lower retainer and the shock tower studs.
6. Drain the coolant from the recovery reservoir into a clean container.
Installation Procedure