LaCrosse V6-3.8L VIN 2 (2005)
6. Install the lower connecting rod bearing to the connecting rod cap.
7. Install the connecting rod cap.
8. Install the connecting rod cap bolts.
1. Tighten the connecting rod cap bolts to 27 Nm (20 ft. lbs.).
2. Use the J45059 to rotate the connecting rod cap bolts an additional 50 degrees.
Notice: Refer to Fastener Notice in Service Precautions.
9. Pry the connecting rod back and forth in order to check for binding. If necessary, loosen and then retighten the connecting rod cap bolts.