LaCrosse V6-3.8L VIN 2 (2005)
4. Important: Notice the direction of the rear oil seal. The new design is a reverse style as opposed to what has been used in the past "THIS SIDE
OUT" has been stamped into the seal as shown in the graphic.
Install the seal onto EN-47623 by placing the seal on an angle and using a twisting motion until it is fully seated.
5. Place EN-47623 along with J8092 onto the housing as shown and apply a constant downward force until the seal is fully seated.
6. Clean the crankshaft sealing surface with a clean, lint free towel. Inspect the crankshaft sealing surface and leading edge of the crankshaft for
burrs/sharp edges that could damage the rear main oil seal. Remove any burrs or sharp edges with crocus cloth prior to proceeding.
