LaCrosse V6-3.8L VIN 2 (2005)
Air Bag(s) Arming and Disarming: Service and Repair
SIR Disabling and Enabling Zone 2
SIR DISABLING AND ENABLING ZONE 2
DISABLING PROCEDURE
IMPORTANT: Refer to SIR Service Precautions.
1. Turn the steering wheel so that the vehicles wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Open the hood and locate the underhood fuse center on right/passenger shock tower.
5. Lift the cover for the underhood fuse center.
IMPORTANT: With the SIR Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation, and does not indicate
an SIR system malfunction.
6. Locate and remove the SIR Fuse from the underhood fuse center.
7. When disabling the roof rail module go to step 8, if the side impact sensor (SIS) needs disabling then go to step 11.
8. Remove the left rear panel.
9. Remove the connector position assurance (CPA) from the left/driver roof rail module connector (2).
10. Disconnect the left roof rail module wiring harness yellow connector (2) from the left roof rail module (3).
