LaCrosse V6-3.8L VIN 2 (2005)
Canister Purge Solenoid: Service and Repair
EVAPORATIVE EMISSION (EVAP) CANISTER PURGE SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
IMPORTANT: The evaporative emission (EVAP) purge valve is located on the upper intake manifold.
2. Disconnect the EVAP canister purge valve purge pipe (2).
3. Disconnect the EVAP canister purge valve electrical connector.
4. Remove the EVAP purge valve bolt (2).
5. Remove the EVAP purge valve (3).
INSTALLATION PROCEDURE
