LaCrosse V6-3.8L VIN 2 (2005)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - CANISTER/FUEL TANK
REMOVAL PROCEDURE
1. Remove the fuel tank.
2. Disconnect the evaporative emission (EVAP) vapor pipe (7) from the EVAP canister (1), the fill limiter vent valve, and the fuel sender assembly.
3. Remove the EVAP vapor pipe.
INSTALLATION PROCEDURE
1. Position the EVAP vapor pipe on the fuel tank.
2. Connect the EVAP vapor pipe (7) to the EVAP canister (1), the fill limiter vent valve, and the fuel sender assembly.
3. Install the fuel tank.
