LaCrosse V6-3.8L VIN 2 (2005)
6. Connect the fuel injector electrical connectors.
7. Reposition the spark plug wires to the fuel rail.
8. Connect the spark plug wires to the ignition control module.
9. Connect the fuel feed pipe (1) to the fuel rail.
10. Tighten the fuel fill cap.
11. Connect the negative battery cable.
12. Inspect for leaks.
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
13. Install the fuel injector sight shield.