LaCrosse V6-3.8L VIN 2 (2005)
Tighten the fitting to 27 Nm (20 ft. lbs.).
3. Install the wiring harness clip to the cooler pipe/hose.
4. Install the cooler pipe/hose to the clips on the steering gear.
5. Install the cooler pipe/hose to the retaining clip on the frame.
6. Install the cooler pipe/hose retaining bolt to the frame.
Tighten the bolt to 10 Nm (89 inch lbs.).
7. Install the return hose to the cooler pipe/hose.
8. Lower the vehicle.
9. Fill the power steering system.
10. Bleed the power steering system.
11. Inspect the power steering system for leaks.