buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 12905 > < SIR Disabling and Enabling Zones|Page 12903
Page 3
background image

7. Connect the left roof rail module wiring harness yellow connector (2) to the left roof rail module (3).
8. Install the CPA to the left roof rail module connector (2).
9. Install the left rear panel.

10. Install the SIR Fuse.
11. Close the underhood fuse center cover.
12. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
13. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -

Vehicle in Vehicle DTC Information.

SIR Disabling and Enabling Zones|Page 12905 > < SIR Disabling and Enabling Zones|Page 12903