LaCrosse V6-3.8L VIN 2 (2005)
Front Door Window Glass Weatherstrip: Service and Repair
Door Window Channel
Window Channel Retainer Replacement - Front Door
Removal Procedure
Notice: Refer to Paint Damage Notice in Service Precautions.
1. Remove the front door frame applique.
2. Remove the front door trim panel.
3. Remove the front door water deflector.
4. Remove the outside rear view mirror.
5. Remove the front door inner window belt sealing strip.
6. Position the window to the full down position.
7. Remove the front door window weatherstrip.
8. Remove the bolt (3) from the window channel retainer (2).
9. Drill out the 4 mm (5/32 in) rivets (1) along the inside edge of the window channel retainer.
10. Remove the window channel retainer from the door.
Installation Procedure
1. Install the window channel retainer to the door.
2. Install the new 4 mm (5/32 in) rivets (1) along the inside edge of the window channel retainer.
3. Install the bolt (3) to the window channel retainer (2).
Notice: Refer to Fastener Notice in Service Precautions.
