LaCrosse V6-3.8L VIN 2 (2005)
Windshield Washer Pump: Service and Repair
WASHER PUMP REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Drain the washer solvent from the washer solvent container.
3. Remove the right front fender liner.
4. Disconnect the washer pump electrical connector.
5. Disconnect the washer pump hose.
6. Use a small flat-bladed tool to remove the washer pump from the washer solvent container.
7. Use a small flat-bladed tool to remove the seal from the washer solvent container.
INSTALLATION PROCEDURE
1. Install the seal to the washer solvent container.
2. Install the washer pump to the washer solvent container.
3. Connect the washer pump electrical connector.
4. Connect the washer pump hose.
5. Install the right front fender liner.
6. Fill the washer solvent container with washer solvent.
7. Close the hood.
