LaCrosse V6-3.8L VIN 2 (2005)
11. Remove the washer solvent container from the right frame rail.
INSTALLATION PROCEDURE
1. Position the washer solvent container to the right frame rail.
2. Install the lower washer solvent container screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 10 N.m (89 lb in).
3. Install the washer pump to the container.
4. Install the level sensor to the container.
5. Connect the washer solvent level sensor electrical connector.
6. Connect the washer pump electrical connector.
7. Connect the washer pump hose.
8. Install the right front fender liner.
9. Install the upper washer solvent container screw.
