LaCrosse V8-5.3L (2008)
12. Cut off the visible ends of the antenna cable from the wiring harness in the following locations:
*
The kick panel area
*
The rear header area
Installation Procedure
1. Install the antenna cable to the vehicle. Use electrical tape in order to secure the antenna cable to the top of the wiring harness. Secure the cable to
the harness at least every 150 mm (6 in).
2. Connect the antenna cable to the antenna extension cable.
3. Install the left I/P compartment access hole cover.
4. Install the carpet. Refer to Front Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair).
5. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
6. Connect the antenna cable (2) to the radio antenna module
7. Install the headliner. Refer to Headlining Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair).
8. Install the left rear upper quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
9. Install the left rear quarter lower panel. Refer to Rear Quarter Lower Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
10. Install the lower pillar trim panel. Refer to Lower Pillar Garnish Molding Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).
11. Install the rear seat back. Refer to Rear Seat Back Replacement (Folding) (See: Body and Frame/Seats/Seat Back/Service and Repair/Rear Seat
Back Replacement (Folding))Rear Seat Back Replacement (Non-folding) (See: Body and Frame/Seats/Seat Back/Service and Repair/Rear Seat
Back Replacement (Non-folding)).
12. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (See: Body and Frame/Seats/Seat Cushion/Service and Repair/Rear Seat
Cushion Replacement).
