buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Rear Door Hinge > < Door Handle Rod Replacement - Rear Outside|Page 16044
Page 3
background image

Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).

2. Install the outside handle bolt (2) through the latch hole.

Tighten the bolt to 10 N.m (89 lb in).

3. Install the bolts (3) to the rear door handle.

Tighten the bolt to 10 N.m (89 lb in).

4. Install the rear door lock. Refer to Rear Door Lock Replacement (See: Locks/Door Locks/Service and Repair/Rear Door Lock Replacement).
5. Install the outside door handle bolt access tape.

6. Install the outside handle rod into the clip.
7. Close the clip cover over the outside door handle rod.
8. Inspect the outside door handle for proper operation.
9. Remove the masking tape.

10. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement (See: Rear Door Panel/Service and Repair).
11. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (See: Rear Door Panel/Service and Repair).

Rear Door Hinge > < Door Handle Rod Replacement - Rear Outside|Page 16044