LaCrosse V8-5.3L (2008)
1. Install the BPMV bracket (4) to the wheel house.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the 3 BPMV bracket nuts (1, 2, 3) to the studs on the BPMV bracket (4).
Tighten the 3 BPMV bracket nuts to 10 N.m (7 lb ft).
3. Install the BPMV and EBCM as an assembly to the BPMV bracket. Refer to Brake Pressure Modulator Valve Replacement (See: Brake Pressure
Modulator Valve Replacement).
4. Turn the ignition switch to the RUN position.
5. Perform the Diagnostic Trouble Code (DTC) List - Vehicle (See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Descriptions).