LaCrosse V8-5.3L (2008)
5. Connect the electrical connector to the mode actuator.
6. Install the I/P compartment. Refer to Instrument Panel Compartment Replacement (See: Body and Frame/Interior Moulding / Trim/Glove
Compartment/Service and Repair).
7. Install the right I/P insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
8. Calibrate the actuator. Refer to Actuator Recalibration (See: Testing and Inspection/Programming and Relearning).