LaCrosse V8-5.3L (2008)
7. Install the heater core outlet cover.
8. Install the heater core outlet cover screws (2).
Tighten the screws to 1.5 N.m (13 lb in).
9. Connect the rear floor air outlet duct to the heater core outlet cover.
10. Install the rear floor air outlet duct to the holes in the floor reinforcement.
11. Install the communication interface module. Refer to Communication Interface Module Replacement (See: Accessories and Optional
Equipment/Cellular Phone/Communications Control Module/Service and Repair).
12. Install the floor carpet. Refer to Front Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair
).
13. Install the RH instrument panel closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair).
14. Install the RH instrument panel closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair).
15. Connect the inlet and outlet heater hose to the heater core.
16. Use J 38185 in order to reposition the heater hose inlet and outlet clamps to the heater core.
17. Refill the coolant. Refer to Cooling System Draining and Filling (L26, LY7 GE 47716 Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair)Cooling System Draining and Filling (L26 Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair)Cooling System Draining and Filling (LY7 Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair)Cooling
System Draining and Filling (LS4 GE47716 Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair)Cooling System
Draining and Filling (LS4 Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).
