LaCrosse V8-5.3L (2008)
Important: The switch mounting bracket must be pressed firmly against the steering column tilt head.
1. Slide the turn signal switch housing onto the steering column shaft assembly.
2. Install the turn signal and multifunction switch assembly only. Refer to Turn Signal Multifunction Switch Replacement (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Turn Signal Multifunction Switch Replacement).
3. Install the tilt head components. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement).
4. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).