LaCrosse V8-5.3L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
Important: Prior to installing a NEW oil filter, ensure that the old oil filter gasket has been removed from the engine block. If not, remove
the old gasket.
1. Install a NEW engine oil filter (437).
Tighten the filter to 30 N.m (22 lb ft).
2. Install the oil pan drain plug (430) and O-ring (429).
Tighten the drain plug to 25 N.m (18 lb ft).
3. Lower the vehicle.
4. Fill the engine with the appropriate amount and type of NEW engine oil. Refer to Approximate Fluid Capacities (See: Specifications/Capacity
Specifications) and Fluid and Lubricant Recommendations (See: Specifications/Fluid Type Specifications).
5. Check the oil level.
6. Install the oil fill cap.
7. Close the hood.
8. Reset the engine oil life monitor, if necessary. Refer to GM Oil Life System Resetting (See: Service Reminder Indicators/Oil Change Reminder
Lamp/Service and Repair).
