LaCrosse V8-5.3L (2008)
Air Flow Meter/Sensor: Service and Repair
Mass Airflow Sensor/Intake Air Temperature Sensor Replacement
Removal Procedure
1. Remove the air intake duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Fuel Delivery and Air Induction/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair).
2. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector (2).
3. Remove the MAF/IAT sensor bolts.
4. Remove the MAF/IAT sensor from the air cleaner housing.
5. Remove the MAF/IAT sensor seal, if necessary.
Installation Procedure
