LaCrosse V8-5.3L (2008)
Manifold Pressure/Vacuum Sensor: Service and Repair
Manifold Absolute Pressure Sensor Replacement
Removal Procedure
1. Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair).
2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector (2).
3. Remove the MAP sensor (714) from the intake manifold.
4. Remove the MAP sensor grommet (715), if required.
Installation Procedure