buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Coolant Temperature Sensor/Switch (For Computer) > < Circuit Protection - Circuit Breakers|Page 5614

LaCrosse V8-5.3L (2008)

Page 2
background image

1. Lubricate the O-ring seal with clean engine oil.
2. Install the O-ring seal (704) onto the CMP sensor, if necessary.
3. Install the CMP sensor (703).

Notice:  Refer to Fastener Notice  (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).

4. Remove the CMP sensor bolt (705).

Tighten the bolt to 12 N.m (106 lb in).

5. Connect the CMP sensor electrical connector.

Coolant Temperature Sensor/Switch (For Computer) > < Circuit Protection - Circuit Breakers|Page 5614