LaCrosse V8-5.3L (2008)
Turn Signal Switch: Service and Repair
Turn Signal Switch Housing Replacement
Turn Signal Switch Housing Replacement
Removal Procedure
Caution: Refer to SIR Caution (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution).
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
2. Remove the tilt head components. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement).
3. Remove the turn signal and multifunction switch assembly only. Refer to Turn Signal Multifunction Switch Replacement (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Turn Signal Multifunction Switch Replacement).
4. Slide the turn signal switch housing off of the steering column shaft assembly.
Installation Procedure
